News Detail

12 precautions to ensure the safety of the eyes and nose of the plush toy

Issuing time:2019-06-25 08:33Author:Nancy

12 precautions to ensure the safety of the eyes and nose of the plush toy

1. Eyes:

A. Check whether the eyes used are correct, whether the eye quality is in compliance with the standard, and any flaws in the eyes, blisters, defects,

and scratches may not be used;

B. Check if the eye pads are matched, too big or too small to accept;

C. Understand that the eye is set in the correct position of the toy. Any high or low eye or eye distance error is not acceptable;

D. Adjust the best strength of the eye-fixing machine when ordering the eye, and do not make the eye crack or loose;

E. Any eye must be able to withstand the tension of 21LBS. (about 9.5 kg or so)


2, set the nose:

A. Check if the nose used is correct, whether the surface is damaged or not, and whether there is deformation;

B. The position is placed correctly, the position is wrong or the distortion is not acceptable;

C. Adjust the best strength of the eye-fixing machine, and the nose surface should not be damaged or loosened due to improper force;

D. The pulling force should meet the requirements and must withstand the tension of 21LBS.


3, hot melt:

A, the sharp part of the tip of the eye and the nose must be hot-melted, generally requiring hot melt from the tip to the end;

B, incomplete heat fusion or hot melt over the head (melting the gasket) is unacceptable;

C. Be careful not to burn other parts of the toy during hot melt.

IMG_6680.jpg

Nancy

Mobile:86 15012637931

Wechat: 86 15012637931

Email: nancy@taihuatoy.com



Share to: